Secure Configuration Steps of The RangeXTD WiFi Range Extender

Secure Configuration Steps of The RangeXTD WiFi Range Extender

Secure Configuration Steps of The RangeXTD WiFi Range Extender 

Description- The RangeXTD WiFi Range Extender is used for wireless networks at your homes and offices. Here you can easily get the configuration steps.

Keyword- RangeXTD WiFi Range Extender

The RangeXTD WiFi Range Extender is the next-generation WiFi extender. The extender has powerful features that can supercharge your computer network. So you can stream your favorite movies and play online games with a high-speed of up to 300 Mbps 2.4 GHz band. Also, it has two built-in antennas which provide a high range of network connections. It has an LED signal indicator that helps to read the signal range and tells you the actual speed of the WiFi extender. The wireless signal reach can reach every area of your house that can eliminate the dead spots by reaching all over your house. 

You can also place the RangeXTD WiFi Range Extender in any room and get uninterrupted high-range data. It is also used in small offices as well to get better working experience. It can easily be connected with your existing router. So you don’t need to purchase extra routers or new modems for your WiFi range extender.

Secure and Easy Configuration Steps of the RangeXTD WiFi Range Extender

The RangeXTD WiFi Range Extender is used for providing WiFi in all areas and is ideal for your homes and offices. The extender can take an existing 802.11n wireless signal router to extend the range of the WiFi signal. The RangeXTD extender supports a 2.4 GHz WiFi connection that transmits the WiFi speed of up to 300 Mbps. Also, its super-powerful antennas can provide super excellent WiFi performance. It automatically avoids conflicting issues with its high-tech features. 

In this article, we’ll follow some instructions for rangextd setup. The setup of the extender is easy and simple. You can set up the extender in Five easy ways. Configuration with the help of the WPS button, wirelessly configuration of the extender, or configuration with Rj45 cable, with AP mode or router mode.

Configuration with the help of the WPS button

This is the easiest and quickest way to configure your wireless extender with the help of the WPS button. Firstly, you have to check whether your existing router does support the system or not. If you need a stable and strong internet connection between your router and wireless extender then install the router in an appropriate position. The wireless router should not be so far away from the extender. If you create a long distance between your connected devices then it will create a problem for you to get a stable internet connection.

Secure Configuration Steps of The RangeXTD WiFi Range Extender

Check the LED Status of your extender

You need to find a new place for your router if the LED light does not blink. Then you just need to set the position of the repeater into the repeater mode. Then plug your extender into the wall socket and router as well. When your extender or router is powered on, then turn on the WPS Button. You will get the WPS button at the bottom of the router. Then wait for two or three minutes until the LED light of the router starts flashing. Then read the on-screen instructions when the router is powered on.

Configure the RangeXTD extender wirelessly

For the configuration of the range xtd extender setup. Firstly, the mode of the repeater should be selected into the repeater position. Then power on your extender by plugging it into the power socket. After that click on the icons that are available on the right screen of the desktop. You will find a RANGEXTD named WiFi connection.  Tap on that and it will connect automatically after a few seconds. 

After that launch, any web browser and type the default IP address in the address bar and search for the device. When your login screen appears on your desktop screen you need to follow the steps like entering your username and WiFi password. Now enter as an admin. 

Now log in to the web page and select your network SSID with a specific password of your router.

Configuration with Rj45 cable

In this step, you need to configure your extender with the help of the Rj45 cable. So first of all, plug your extender in the power source and turn on your computers or laptops with the help of an Rj45 cable. After that follow the A3 to A6 process for the configuration of your device.

Configure with AP mode

In this process, you will use AP mode for the setup of the trifi booster. This process is also known as a wireless access point. It will use the end device to connect to the router in AP mode. So firstly, you should select the access point position for the setup of AP mode. Then plug the device into the electric power socket and follow A2 to A5 instructions. After doing this step, click on the apply button. The device will restart itself. Now go to your WLAN settings and connect to your new SSID network name.

Configure with WiFi router mode

In this method, the device will be connected with the help of a DSL or cable modem. It will start working as your regular router. In this mode, it should be selected to the route position as it is set up by router mode. Now plug your device into the power socket and follow A3 to A6  instructions. At last, click on the router button for successful configuration with the WiFi router mode.

Review of the  RangeXTD WiFi Range Extender

This device is just like plug-and-play. You can place this device where you set up your main systems like your living room or small office. It simply starts after plugging into the power socket and it will be ready to use. You don’t need any technical support for the setup of the rangextd extender. It is one of the nice things in that you can invest your money without any further discussion and the price is also very low if it is compared to other extenders.

Guest Post Careers News